德国List-Magnetik分体式涂镀层测厚仪
With the List-Magnetik MEGA-CHECK Pocket coating thickness meters, you can carry out exact, reproducible measurements. The measuring probes digitize the signals in the probe before they are transmitted to the measuring device via the probe cable. The probe cable, which can be plugged in on both sides, connects coating thickness tester unit and probe, and can be easily replaced in the event of a cable defect.
With the press of a button MEGA-CHECK Pocket is easy to use. Thanks to the integrated ASR (Automatic-Statistic-Result) technology, the device can display the statistics of the past measurement series. If the MEGA-CHECK Pocket is switched on without a probe, the statistics of the last measurement series are automatically displayed one after the other.
A coating thickness meter is usually used in the quality assurance of coating processes, for example to determine the paint thickness of a paint job, in the testing of vehicles or steel structures, in fire protection (determination of the layer thickness of steel doors). It is not only a paint thickness gauge, but also gumming, anodizing and galvanic coatings can be measured.
The Coating thickness gauge MEGA-CHECK Pocket FE measures layers of lacquer, paint, plastic, rubber, ceramic, zinc and galvanic coatings (except nickel) on iron and steel substrates according to ISO 2178 with a magnet-inductive probe.
The Coating thickness gauge MEGA-CHECK Pocket FN uses a combined probe to measure layers of lacquer, paint, plastic, rubber, ceramic, zinc and galvanic coatings (except nickel) on iron and steel substrates, and insulating layers on non-ferrous metals based on the eddy current method- Brass, copper, bronze, non-magnetic stainless steels, according to ISO 2178 and ISO 2360.
